I am available to be contracted to offer commissions on the following blaster's:
- Maverick
BT spring upgrade
Penny Mod
Russian Roulette
AR removal
Improved plunger seal
Custom camo paint
LED's - you will need to supply the clear Mav blaster though.
- Stampede
Spring upgrade - 9kg or 11kg
16.8v power upgrade
AR removal
Improved plunger seal
Custom camo paint
- Longshot
See thread:
http://www.oznerf.com/t3037-wts-commissioned-modified-blaster-s-including-highly-modded-longshot?highlight=highly+modified
- Spectre
BT spring upgrade
AR removal
Improved plunger seal
Custom camo paint
- Barricade
Clicky-switch mod
8.4v power upgrade
Custom camo paint
Please email me (clunkweaponsco@hotmail.com) if you're interested in any of the above items for sale, or if you'd like a quote/custom commission. Unfortunately, My PM inbox fills too quickly, so probably better to use my email address for GENUINE ENQUIRIES ONLY.
CWC Longshot commission:
Modding Level 1
- Longshot blaster with 6-round clip only.
- BT V2 spring and stock LS spring.
- Reinforced boltsled with coat-hanger and aluminium lamination.
- Brass breech, with 9/16 barrel, perfect for blue foam darts.
- 6 x blue foam stingers - customised for my Longshot's.
- Plunger padding, improved plunger seal, plunger head reinforcement.
- Buttstock reinforcement (unable to be collapsed once this mod has been completed)
Cost: $160
Level 2
- Custom camo paint job.
Choice of 4 standard colours, with gloss finish.
NB: I am unable to procure matte finish currently, but this may change down the track.
Total Cost: $210
Extras:
- Basic stencilled name for extra charge of $5 to $10, pending on size. The CWC vampire skull logo will be stencilled for free.
I've been refraining from gluing the plunger head to the rod lately, to allow client's to confirm their spring combo choice upon testing. It's very quick to reinforce this area with epoxy adhesive once you've decided 100% on your choice of springs.
Ranges - generally I get around 130 feet with around a 5 degree elevation. With supplied darts, it is possible to reach ranges over 160 feet, but the purchaser will need to experiment with plunger seal. I can get it fairly close, but the final dialling-in will work better in the actual climate where the blaster will be used.
CWC Stampede commission
Modding Level 1
- Stampede blaster with 2 x 18-round clips, shield and bipod.
- 9 or 13kg spring upgrade.
- Removal of AR's, air bleed hole covered.
- Improved return spring, o-ring and plunger seal, with plunger buffer pad.
- 4 x Trust/Ultrafire li-ion batt's and UF WF-139 charger (requires 240v fig.8 lead)
- 16.8v power upgrade, with 9v snap wiring and 4 x AA battery holder.
Extras:
- Exchange of 18-round extended clips for 1 x Raider 35-round drum magazine.
Cost: $150
Level 2
- Custom camo paint job.
Choice of 4 standard colours, with gloss finish.
Two-toned CWC vampire skull stencilled image (WIP - currently finding the best size for stencil)
Cost: $200
Extras:
- Basic stencilled name for extra charge of $5 to $10, pending on size.
- Painted Shield and bipod: $10 without skull on shield, $15 with skull.
- Painted clips (not drum): $15 without skull on clips, $25 with skull.
Ranges: 65 feet flat, 85 feet angled from hip (using custom-weighted blue foam stinger's).
ROF - approximately 5 rounds per second at 16.8v.
Added Extra's for both commissions:
Various scopes:
- Adjustable zoom tasco scope for extra charge of $15
- Non-adjustable tasco scope for extra charge of $10
- Holographic red dot scope for extra charge of $35
- Configurable reticle red dot scope for extra charge of $30
- Imitation Acog Scope for extra charge of $55
Cheers,
Last edited by clunk07 on Tue Sep 20, 2011 1:58 pm; edited 24 times in total