Magstrike Stock mod

Since this is my first major mod and i have limited supplies please go easy on me, Thanks.

First you will need you Magstrike and a Recon Stock + hot glue and a hacksaw.

1) Grab your Stock and cut it like this:


2) Now cut the part that joins to the Recon so that it will fit over the black nub that the piston is located in.


3) Now hot glue in place!

Note: This mod does not affect ranges only practicality, With a bit of epoxy putty and a paint job it should look a bit better!

The magstrike has a built in stock. The tank! Am I the only person who has noticed this?!?

Yes it does have a stock but My new one feels better and in my opinion is more practicle.

To upload pictures click the button 11th from the left and select your file. Its a tree with a floppy drive in front of it. Read in the welcome to OZnerf section at the post on how to upload pictures.

-Hamish

Gah!

A bit crude isn't it? Maybe if who hid the joint to make it...more pleasing to the eye?

You could but as I said I have limited supplies and a low skill level...

I respect you for trying to do the most with what you have, but I'm really doubting the integrity of that join, I like to apply a bit of pressure when aiming sometimes, and on some pump guns you kinda pump 'against' something.. and in this case it would be the stock against your shoulder with the pistol grip taking some of the force also.. really not sure how that would hold up.

Also epoxy and epoxy putty are quite brittle and really not the best at this kind of thing, the best is always hardware, ie bolt that shit on.

Like I said, I know you have limited supplies, these are just some comments so you can improve in the future

Aj

-Aj- wrote:I respect you for trying to do the most with what you have, but I'm really doubting the integrity of that join, I like to apply a bit of pressure when aiming sometimes, and on some pump guns you kinda pump 'against' something.. and in this case it would be the stock against your shoulder with the pistol grip taking some of the force also.. really not sure how that would hold up.

Also epoxy and epoxy putty are quite brittle and really not the best at this kind of thing, the best is always hardware, ie bolt that shit on.

Like I said, I know you have limited supplies, these are just some comments so you can improve in the future

Aj

Thank you for your feedback I will try to find a way to bolt it.
Edit: Done! I have bolted al the joints and added an eyebolt to attach a strap to.

I don't mind the hot glue because I would never open the gun anyway.

You are wrong phuonguyen, that black cap at the end is removable and has no preference for either side. It is a standalone piece. Therefore, if he has hotglued and bolted that piece and not the surrounding shell, he can still open it. If he has glued beyond that black cap he wil be using pliers and a knife.