Home
Hey Guys,
As you are guessing, this is all pretty new to me, however it hasn't stopped me modding some of the guns I have Here is a quick list of the guns, mods done, mods waiting to be done and some pics. ENJOY!!!
Nerf Rayven:
Removed all Safety's
Added in Internal 7.4v Lipo (TIGHT SQUEEZE!) with external connection and charging points
Cleaned up wiring internally
removed barrel and replaced with Black "Riser" pipe. Bored internal entry point and situated closer then stock to flywheels
As a result of the barrel change i get NO false shots where the bullet get stuck in the barrel, better accuracy, better range and the lipo adds more distance and punch ofcourse. I might step up to a bigger lipo next rebuild.
Ofcourse, its going to get a paint job to match the other guns below. Leaving Grey parts great, and the rest will be black with metalic blue highlights
Nerf Stampede v1.0 "G36C"
Removed AR, Safety's (left toggle on / off switch)
Added in 14.8v lipo (will go a 16.8v probably later)
Waiting on OMW 6kg+ spring
Resleaded Plunger
Chopped front end off
Chopped rear end off
Added 6cm barrel and muzzle clip from the Rayven
Added LED Tact' Light wired with original on / off switch and 3x AAA batteries
Still to patch up rear end of battery area. When final battery solution is sorted, this will be done.
Paint job to be done, same as the Rayven
My other Stampede will get the opposite mod done, it will be a kick ass long range assault rifle. Its hiding in my shed as the Mrs doesn't know i brought a 2nd one to chop up - she thinks i chopped up my original... hehehe.....
Nerf Night Finder - last but not least
Removed AR
Removed crap red LED
Resealed Plunger
Waiting on OMW Spring
Added in LED torch head, wired to custom on / off switch in front of trigger (Left hand side) - will rewire to also work off trigger if i want later, its setup ready to go minus one connection
Added 2 bullet holder to Left hand Side
Holding 5 Steamlines with Hot Glue tips
Makes for a great backup gun or for long range accurate fire. Can't wait to get OMW spring and then do a barrel mod for better sealing of bullet.
As you are guessing, this is all pretty new to me, however it hasn't stopped me modding some of the guns I have Here is a quick list of the guns, mods done, mods waiting to be done and some pics. ENJOY!!!
Nerf Rayven:
Removed all Safety's
Added in Internal 7.4v Lipo (TIGHT SQUEEZE!) with external connection and charging points
Cleaned up wiring internally
removed barrel and replaced with Black "Riser" pipe. Bored internal entry point and situated closer then stock to flywheels
As a result of the barrel change i get NO false shots where the bullet get stuck in the barrel, better accuracy, better range and the lipo adds more distance and punch ofcourse. I might step up to a bigger lipo next rebuild.
Ofcourse, its going to get a paint job to match the other guns below. Leaving Grey parts great, and the rest will be black with metalic blue highlights
Nerf Stampede v1.0 "G36C"
Removed AR, Safety's (left toggle on / off switch)
Added in 14.8v lipo (will go a 16.8v probably later)
Waiting on OMW 6kg+ spring
Resleaded Plunger
Chopped front end off
Chopped rear end off
Added 6cm barrel and muzzle clip from the Rayven
Added LED Tact' Light wired with original on / off switch and 3x AAA batteries
Still to patch up rear end of battery area. When final battery solution is sorted, this will be done.
Paint job to be done, same as the Rayven
My other Stampede will get the opposite mod done, it will be a kick ass long range assault rifle. Its hiding in my shed as the Mrs doesn't know i brought a 2nd one to chop up - she thinks i chopped up my original... hehehe.....
Nerf Night Finder - last but not least
Removed AR
Removed crap red LED
Resealed Plunger
Waiting on OMW Spring
Added in LED torch head, wired to custom on / off switch in front of trigger (Left hand side) - will rewire to also work off trigger if i want later, its setup ready to go minus one connection
Added 2 bullet holder to Left hand Side
Holding 5 Steamlines with Hot Glue tips
Makes for a great backup gun or for long range accurate fire. Can't wait to get OMW spring and then do a barrel mod for better sealing of bullet.
