Photon Burst Power Pistol (what a ludricously convluted name that is) is kind of like the strange love child between a Maverick (Priming method), Nitefinder (Light on half trigger pull) and a Powerclip (non removalbe raising clip). I got it at Toys'r'Us for $20 and its made by Toy quest under the Air Zone name. Stock ranges are as it says on the box 7.5 meters
Take your stock Photon burst and remove the 2 screws closest to the clip. there you will be able to coax the clip out. Its all we are going to be working on for this mod.
See the holes at the back of the clip. these need to be drilled out. use a drill bit thats a little larger than the existing hole to increase air flow. but not too big or you will ruin the clip to plunger tube seal.
Like so. Make sure to dr burr the holes so the clip slides smooth. Use a sharp knife and run it around the inside of the hole.
To let the clip be removed from the top "magstrike style", you will need to cut this tab back. try your best to make it exaclty like the track its between.
then you will need to remove these flaps. just rip 'em out. the plastic they are made from is soft, so they will give up easy.
like so. now you can load the clip in through the top. And if your name is Blingy McRichRich you can buy multiple Photon bursts for multi clip action.
With the AR's out, it now hits about 12 meters with the stock darts. I need to do some more extensive range tests, but it seems to work ok with stefans.
Take your stock Photon burst and remove the 2 screws closest to the clip. there you will be able to coax the clip out. Its all we are going to be working on for this mod.
See the holes at the back of the clip. these need to be drilled out. use a drill bit thats a little larger than the existing hole to increase air flow. but not too big or you will ruin the clip to plunger tube seal.
Like so. Make sure to dr burr the holes so the clip slides smooth. Use a sharp knife and run it around the inside of the hole.
To let the clip be removed from the top "magstrike style", you will need to cut this tab back. try your best to make it exaclty like the track its between.
then you will need to remove these flaps. just rip 'em out. the plastic they are made from is soft, so they will give up easy.
like so. now you can load the clip in through the top. And if your name is Blingy McRichRich you can buy multiple Photon bursts for multi clip action.
With the AR's out, it now hits about 12 meters with the stock darts. I need to do some more extensive range tests, but it seems to work ok with stefans.