Nano Maverick Barrels

The idea of this mod is to have 6 barrels that can fit inside a Maverick to Fire Nano Size Stefans (10mm FBR). Also that you can remove the barrels at will if you need to fire regular size ammo if you run out of Nanos

If you have a pre modded Maverick, you don't even need to open it.



Make sure Your barrel is at this stage, With the Air Restrictors and Pegs removed (Yes I'm aware that one is cracked, but it got glued).


Cut 6 Lenghts of Brass Barrel 7cm long, Ones that can fit Nano Stefans inside. I can't remember the diamater bacasue the tube i got didn't have the sticker on it that tells you what size it is. (Also I'm aware thats only 4, but thats all i had)


Then apply Electrical tape to the barrels. Start with one layer, then above that 2 layers and then 4 layers above that. This is done becasue the stock barrels are tapered (the diameter gets smaller the further down the barrel you go)


The you can stick them inside of the stock barrels, make sure they don't protrude out of the stock barrels or it won't rotate.

It can now fire Nano Stefans about 13 meters. But my maverick is very unreliable so i cant get reliable ranges.

Its an ok mod, but not one ide use myself

does it work??????

of course it would, but normal sized stefans r better because they fit in ALL barrels including stock